TURNKEY SERIES * Heavy Descaling * GIANT FINISHING - Wedge 5 (5.0 Cubic Feet)
You Get - TURNKEY SYSTEM for Heavy Descaling
You Get - Electronically Controlled Process
You Get - Consistent Quality Parts
You Get - UL/CSA & NEMA Safety Rated Equipment
What will I get?
- TURNKEY SERIES - Media Kit for Heavy Descaling
- Aggressive Ceramic - 400 lbs
- OX-15 Descaler - 5 gallons (concentrate)
- I-85 Rust Inhibitor - 5 gallons (concentrate)
- TURNKEY SERIES - Equipment for Heavy Descaling
- Wedge 5 for heavy descaling
- Variable Speed AC Inverter Drive
- Push Button Controls, Adjust Vibration Frequency Up & Down
- On/Off Switch - 110 volt
- Overload - Manual
- Pump - Recirculation
- Settling Tank - Built In 10 Gallon Tank
- Urethane Cast Liner
- Balanced Suspension Drive
- Hinged Sound Cover, for Quiet Low DBA Operation
- Heavy Duty & Lockable Casters, Make it Easily Portable
- Powder Coated Paint - Giant Finishing Blue
How big will my Wedge 5 be?
- Tub Process Capacity - 5.0 Cu Ft.
- Tub Length (inside) - 35 1/4"
- Tub Width (inside) - 19"
- Parts/Media Discharge Height - 22"
- Overall Height - 39"/47"
- Overall Length - 45"
- Overall Width - 31"
- Floor Space - 9.7 Sq.
This is a giant finishing machine—it can handle the toughest tasks you can throw at it!
How much will my W-5 weigh?
- Shipping Weight - 1,040 lbs.
Tell me about my tub's liner.
- Urethane Cast Linger
- Polyurethane Lining Thickness - 3/4"
- Polyurethane Lining Hardness - Durometer 90+
Tell me about my Motor.
- Voltage - 115/1/60hz (see Optional Features, for 230/460, 3 Phase)
- Horse Power - 1 1/2 Hp
- NEMA Class - T.E.F.C. (Totally Enclosed Fan Cooled)
Was my heavy descaling giant finishing Wedge 5 manufactured in the United States?
- Yes, it was MADE IN THE USA, Addison, IL.
How do I load & unload my W-5?
- Parts - Easy Loading/Unloading Manual Access
- Media - Media Discharge Door, Easily Empties Media
Were there any advanced manufacturing concepts designed into it?
- Engineered for LEAN Manufacturing
- Engineered for Cell Type Operation
- Engineered to Highest Energy Efficiency Standards in the industry
What Safety was designed into my machine?
- UL/CSA Rated Controls
- UL/CSA Rated Wiring
- UL/CSA Rated Motors
- NEMA Class Motor, T.E.F.C. (Totally Enclosed Fan Cooled)
- Fully Shrouded Mechanical Section
Will I receive a Warranty with my Wedge 5 giant vibratory tumbler?
- One Year Conditional WARRANTY.
I need to Customize my machine. What Options do I have?
- OPTION - 230/460 Volt AC / 3 Phase / 60hz Motor
- Customer to supply their own disconnect
- NO 110 Volts on machine, NO timer & receptacle for auto compound
- OPTION - Control Panel
- Process Timer - 0-6 Hour
- Receptacle - 110 Vac
- Standard Voltage - 230/460 Volt AC, 3 Phase, 60 Hz
- Rating - NEMA 12
- NOTE No 1: Electrical controls and components for the herein quoted equipment are of standard design using I.E.C. components and do not represent individual customer requirements. If special machinery specifications, i.e., electrical controls and/or components do exist, please submit to AccuBrass for evaluation and re-quotation purposes.
- NOTE No 2: Other voltage is available upon request. Consult AccuBrass for additional charges.
- OPTION - ST-55 Settling Tank
- Capacity - 55 Gallons
- Height - 14"
- Width - 36"
- Depth - 36"
- Paint - Powder Coated
- Overflow Connection to Drain - (2) 1" NPT
- Includes Pull Out Sludge Trey, in First Section
- OPTION - Automatic Premixing Compound System
- Designed to mix compound and water into vibratory mass on a continuous basis, to keep parts and media clean during processing.
- Mixing Head
- Spray Headers
- 15 Gallon Drum
- Drain Hoses
- OPTION - Automatic Cartridge Grease System
- Lubricates your Vibrator Bearings, based on Timer's Adjustment
- Adjustable Cycle Timer
- Dual Grease Reservoirs. Holds 2 x 125 ML of Grease.
- Spring Powered Injectors
- OPTION - Tub Dividers
- Allows you to run one type, or size of part, in one side of the finishing tank, and another, in the other side of the finishing tank.
- Allows Recirculation System to still flow Compounding Solution, to both sides of the Tub Divider, so a second system will not be required.
- OPTION - Sound Package
- Machine will be lined with noise reduction foam, to keep machine running under 84 dba.
- OPTION - Curved Rear Wall
Can we get someone from Giant Finishing to come to our location & give us Start-Up Assistance?
- Yes we can send someone to your facility to help you with things like:
- Proper Start-Up
- Machine Adjustments
- Operation Training
- Preventative Maintenance Training
- At Your Location - $600 Per Day
- Travel Time - $45 hr.
- Travel Expenses
What type of Lead Time am I looking at?
- STANDARD DELIVERY - We typically keep these in Stock. The only time we're out of Stock, is if there's an unforeseen surge in Customer Orders. If this happens, lead time will be dependent on the surge.
101 Giant Finishing - TV Spot
100 Giant Finishing - LMC Legendary Motorcar
109 Giant Finishing - W-5 - Overview
104 Giant Finishing - Velocity TV - Interviewing VP of Giant Finishing
giant finishing turnkey series heavy descaling w-5 5.0 cubic feet
We Also Recommend
TURNKEY SERIES * General Deburring * GIANT FINISHING - Wedge 5 (5.0 Cubic Feet)
8,16700 Save $ 1,388.99